Align RC Brushless ESC(Governor Mode) RCE-BL70G

Align사의 70A 브러시리스 변속기(헬기용 거버너 지원)

550E급 전동헬기용 거버너 변속기로서 ALIGN 특유의 부드러운 Start-up을 경험하실 수 있습니다.

특히 70A 변속기는 Digital BEC가 변속기 내에 내장되어 있어 22.2V까지 배터리를 사용할 수 있으며 Digital Mode-6 BEC Out-Put Mode에서 BEC 출력전압을 5~6V내에서 조절할 수가 있습니다.

물론 일반적인 전동 비행기, 글라이더 등 범용적인 용도로도 사용이 가능합니다.

아울러 400Hz Input Rate를 지원, 멀티콥터용 변속기로도 훌륭한 성능을 발휘합니다.

<제품 사양>

- 연속 전류 : 70A

- 최대 허용 전류 : 110A >15sec

- 모터 : 2~10 Pole 모터 지원

- 최대 허용 RPM(Governor Mode) : 2 Pole 모터 기준 : 190,000RPM

- 허용 입력 전압 : 5.5~25.2V(Upto 6S Li-Poly)

- 허용 배터리 전압 : Li-Poly : 2S~6S

                           NiCD/NiMH : 6~18Cell

- Dim' : 72 * 28 * 11mm

- Weight : 72g

<제품 특징>

●Large-sized high efficiency heatsink makes the ESC stable under large current output.
●5-6V step-less adjustable BEC output allowing custom voltage setting to match servo specification.
●BEC output utilizing switching power system, suitable for 7.4-22.2V (2s-6s) Li battery, with continuous current rating of 3A, and burst rating of 5A.
●Three programmable throttle speed settings to support quick throttle response.
●Include soft start and governor mode.
●Small and compact PCB design for lightweight and simple installation.
●Large heat sink for optimum thermal performance.
●Highly compatible to work with 98% of all brushless motors currently on the market.
●Ultra-smooth motor start designed to run with all kinds of brushless motors.
●The power inlet utilizes a Japanese made "Low ESR" capacitor in order to provide stable power source.
●The throttle has more than 200 step resolution that provides great throttle response and control.
●If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.
　

<제품 사양>

●Contimuous current:70Amps with porper air flow
●Surge current:110Amps(5sec)
●Supporting motor types:2~10 pole in/outrunner brushless motors.
●Supporting maximum RPM:2poles=>190,000rpm;6poles=>63,000rpm
●Supporting input voltage:5.5V~25.2V
●Supporting battery types: Li-ion/ Li-poly 2~6 cells
●BEC output voltage: 5-6V step-less adjustment
●Continuous current 3A; Burst current 5A
●Size:65X31X18mm
●Weight:72g

NOTE:
1.When setting to the Quick response speed, theacclerative peak current will increase.
2.To minimize possible radio interference induced by switching power system, BEC should be installed at least 5cm away from the receiver.The use of PCM receiver is recmmonded.

plus
●ALIGN standard 4mm socket terminal X3pcs(Max. current 110A)
●Heat shrink tube x 3 PCS(Φ5x28mm)

<제품 이미지>